Grant Vortex Eco Wall Hung System 12-16kW Boiler

Grant Vortex Eco Wall Hung System 12-16kW Boiler

The Grant Vortex Eco wall hung range of boilers feature the latest version of the Grant Vortex stainless steel heat exchanger and baffle system and come in outputs ranging from 12–21kW with sealed system options.

Internal wall hung models fit with Grant’s EZ-Fit low level, high level and vertical flue systems, so almost any installation situation can be catered for.

Features and Benefits:

• Wall Hung Oil-Fired Condensing Boiler
• Internal System Model
• Part of the Award Winning Vortex Oil Range
• Exceptionally Quiet Operation
• Wall Mountable
• Compliant with September 2018 Low NOx Legislation
• Unique Grant Vortex Stainless Steel Heat Exchanger
• 91.6 – 91.9% Gross SAP2009 Annual Efficiency
• 16kW Max Output
• Size: 842mm x 630.5mm x 335.5mm
• 5 Year Manufacturer Guarantee (When Installed by a G1 Accredited Installer)

Technical Specifications

Frequently Asked Questions

• What is the difference between the Grant Vortex boiler and the Grant VortexBlue boiler?

  The Grant Vortex boiler range uses a low NOx yellow flame burner, whereas the Grant VortexBlue boilers uses an ultra-Lox blue flame burner. The combustion head on the VortexBlue’s burner is specially designed to re-circulate the combustion gases. Re-circulating the combustion gases in this way significantly reduces NOx emissions and produces the clean blue flame which gives the technology its name.

• What size of boiler do I need?

  Before selecting your new boiler, Grant recommend requesting that your installer performs a heat loss estimation of your home to ensure that you select the most appropriate size and type of boiler. Heat loss depends on the efficiency of any heat retaining methods that can be implemented in your home, for example loft insulation, double glazing, cavity wall insulation, draught proofing, etc. These practises could mean that your new boiler may need to be smaller than the one that it is replacing.

• Can I run a new Grant Vortex boiler on an older heating system?

  As long as the system is thoroughly cleansed and updated to fully pumped operation, it is possible to run a Grant oil boiler on an older heating system.

• Can I use my existing flue system for my new Grant boiler?

  Unfortunately, in most cases you will not be able to use an existing flue system with a new boiler. Condensing boilers have a lower flue gas temperature which can lead to harmful condensation in the chimney/flue. You will need to ensure that you install a Grant approved flue system which is stainless steel and sealed securely at the joints to prevent it from leaking. All Grant external modules come with a factory fitted flue system.

• How often should a Grant boiler be serviced?

  Grant recommend that an oil boiler operating on kerosene should be serviced every twelve months, and an oil boiler operating on biofuel or gas oil should be serviced bi-annually.

• I’m worried that my oil supply could run out, how would this affect my system?

  Grant recommend keeping your oil tank filled as required to ensure that the oil does not run out. If your oil supply does run out, you should contact a qualified oil heating engineer to bleed the system once the tank has been filled. It is recommended that after filling, a period of about an hour is allowed for any sediment that has been disturbed in the oil tank time to settle before operating the boiler. With an oil boiler, there is a risk of air and contaminants that sit in the bottom of your oil tank (water and sludge) reaching the oil line and ultimately the burner. This will affect the operation of your boiler, however maintaining an adequate oil level in the tank can prevent this from happening and causing further damage.

Documents

• Grant Vortex Eco Wall Hung System 12-16kW Boiler - Range Brochure (1.9 MB)